Specifications: Includes mouse pad, wrist rest, mouse pouch
+ Larger display sizes may inhibit the keyboard tray folding flat in storage position
Weight Capacity: Listed weight capacity represents total load, including both the monitor and contents of keyboard tray. Maximum monitor weight = 25 lbs (11.3 kg); monitor thickness greater than 3" (7.6 cm) may decrease capacity
Mounting Standards: VESA FDMI MIS-D, 100/75 (hole pattern: 100 x 100 mm & 75 x 75 mm)
Fold-down keyboard tray
Negative-tilt keyboard tray is adjustable 0° to -10°
Integrated cable management system can be configured on either side
Easy-to-clean exterior
Specifications: Glide Wall Mount will be hidden behind display in most cases when used with screen size of 46" or greater; when used with screens smaller than 46", the mount may be visible
Mounting holes must fit within spacing range below:
Horizontal = 200 mm (min.) to 400 mm (max.)
Vertical = 100 mm (min.) to 400 mm (max.)
Includes low-profile lift module, mounting template, tilt brackets, installation and mounting hardware, cable management hardware
Specifications: Includes fully assembled arm, wall mount base, mounting hardware
Can be configured to hold a laptop instead of an LCD display; also order the accessory Notebook Tray (50-193-200)
Quality Tested: 10,000-cycle test applied to lift mechanism, ensuring years of trouble-free height adjustment
Arm folds back over the base into a compact retracted position—space between wall and VESA plate is just 4.4" (11 cm) when fully retracted
Mounting Options: Attaches directly to sturdy vertical surfaces. Where applicable, install to wood stud. Also attaches to Wall Track using bracket 97-091 (order separately)
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Tilt Range: 90° backward, 90° forward
Pan Range: 180° at base; 360° between extension and arm
Extension Range: 2...
Specifications: Ships fully assembled; no tool-adjustments needed for installation
Footprint = 35" x 23" (89 x 59 cm)
Fits on desk surfaces 24" (61 cm) deep or larger
Keyboard tray dimensions = 25" x 9" (64 x 23 cm). Recommended maximum keyboard width = 18" (45 cm)
Keyboard moves in tandem with the worksurface. Tray is positioned 4.5" (11.4 cm) below worksurface to maintain ergonomic spacing between screen height and keyboard
Displays can be placed directly on the worksurface. Alternatively, use our monitor mount kits to integrate displays into system
This product is certified in compliance with indoor air quality standards defined by ANSI/BIFMA pertaining to emissions of VOC (volatile organic compounds)
Product Weight: 49 lbs (22.3 kg)
Specifications: Part Number: 97-468-202
Description: Vertical Universal CPU Holder (silver)
Includes CPU holder, spacer, bumpers, wall mount fasteners, security nuts and bolts
CPU Size Range: 2" to 8" (50.8 to 203 mm) wide; includes plastic spacer to accommodate most small form factor and ultra small form factor CPUs
Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud. To increase support, a Wall Track accessory and bracket kit (60-156), both ordered separately, are recommended
Shipping Dimensions: 10.7"H x 7.7
Frees up work space
Mounting versatility: Installs directly to any sturdy vertical surface or Ergotron Wall Track system
Durable steel construction
Includes fasteners for locking the holder’s width
Accommodates CPUs from 2" to 8" (5 to 20 cm) wide
Handles loads up to ...
Specifications: Includes Includes: 10" and 34" Wall Tracks with two black track covers, LX Wall Mount LCD Arm, LX Keyboard Arm, wrist rest, mouse pad, mouse holder, Small CPU Holder, two 10" Cable Channels, mounting kits for hollow-wall and wall-stud installation
Quality Tested: 10,000-cycle test applied to lift mechanism, ensuring years of trouble-free height adjustment
Polished aluminum construction offers greater durability and enhanced aesthetics
Snap-fit cap secures interface of arms to extensions for greater stability
Weight Capacity: display = 7-25 lbs (3.2-11.3 kg); keyboard = 5 lbs (2.2 kg); CPU = 50 lbs (22 kg). With monitors greater than 20 lbs (9.1 kg) in weight, the vertical range of motion may be reduced up to 4.5" (11 cm) for a total height range of 8.5" (22 cm)
Mounting Standards: VESA FDMI MIS...
Feature: Installs in three simple steps
Extremely slim profile-just over an inch from the wall
Fits most screens greater than 42" up to 175 lbs (79 kg)
Protect your investment: Integrated security fasteners hold display in place and deter others from removing your display
Includes fasteners for mounting to wood studs or concrete
Features: Increases the reach of an LX Arm
Polished aluminum metal construction offers greater durability and enhanced aesthetics
Adds another pivot-point for more adjustment flexibility
Cable management feature routes cables under the arm, out of the way
Specifications: LCD Size: < 24"
Wt. Capacity: 6–16 lbs, 2.7–7.2 kg
Lift: 5", 13 cm
Tilt: 35°
Pan: 70°
Rotation: 90° P/L
VESA: MIS-D
Description: Neo-Flex Wall Mount Lift (black)
Monitor depth greater than 2" (5 cm) may diminish capacity. Read more
Mounting Standards: VESA FDMI, MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud. To increase support, a separately-ordered Wall Track accessory is recommended
Specifications: Certifications & Standards: VESA 100/75
VESA FDMI MIS-D
VESA C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Load Capacity: 35 lb Maximum
Color: Black
Specifications: Description: WorkFit Corner Standing Desk Converter
Ships fully assembled; no tool-adjustments needed for installation
Extremely stable and solid platform fits surface as shallow as 24" (61 cm)
Keyboard tray dimensions = 36" x 13.2" (91 x 33 cm)
Keyboard moves in tandem with the worksurface. Tray is positioned 4.5" (11.4 cm) below worksurface to
Specifications: Screen: <= 34.00"
Lift: 13.00" (33.00 cm)
Tilt Range: 70 degrees backward, 5 degrees forward
Pan: 360 degress
Rotation: 360 degrees
VESA: MIS-D
Mounting Options: Desk Clamp attaches to surface edge 0.40" to 2.40" (10.00 to 60.00 mm) thick; Grommet Mount attaches through surface holes 0.31" to 2.00" (8.00 to 50.00 mm) wide and up to 2.25" (57.00 mm) thick
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100.00 x 100.00 mm & 75.00 x 75.00 mm)
Weight Capacity: 7.00 to 25.00 lbs. (3.20 to 11.30 kg). With monitors greater than 20.00 lbs. (9.10 kg) in weight, the vertical range of motion may be reduced up to 4.50" (11.00 cm) for a total height range of 8.50" (22.00 cm)
Note: If installed on WorkFit-T or WorkFit-TL, maximum allowable monitor weight is reduced to 14.00 l...
Specifications: Weight Capacity: Display 6–18 lbs (2,7–8,2 kg); keyboard, mouse and barcode scanner 4 lbs (1,8 kg) and up to 10 lbs (4,5 kg) on worksurface
Pan: 360°
Rotation: 90°
Specifications: Device Supported: Flat Panel Display
Maximum Load Capacity: 25.00 lb
Maximum Screen Size Supported: 42"
Color: Polished Aluminum
VESA Mount Compatible: Yes
VESA Mount Standard: 75 x 75, 100 x 100, 200 x 100, 200 x 200
Height: 20.0"
Depth: 33.0"
Weight (Approximate): 11.00 lb