
-Adds 7 more USB 3 ports. -Plug and play. Windows 11 had zero issues with it.

Maybe a Necessity if You Have a USB-C on Front Panel Header because no USB 3.2 GEN1 connector on motherboard. The PCI-E 1X to USB 3.2 GEN1 5Gbps 20pin Front Panel Header allows you to connect the USB-C front panel header to your PCI-E 1X slot

Easy install, works as expected.


-Easy installation -Works as intended

![M.2 to SATA Adapter [6-Port], RIITOP M2 NVMe to SATA 3.0 Card with ASM1166 Chipset for SSD/HDD up to 6Gbps, Come with Heatsink M.2 to SATA Adapter [6-Port], RIITOP M2 NVMe to SATA 3.0 Card with ASM1166 Chipset for SSD/HDD up to 6Gbps, Come with Heatsink](https://c1.neweggimages.com/productimage/nb300/ARE9S2509150HK24B8F.jpg)

Brand New & Undamaged in the Box.


Works well, as fast as youd expect a Pcie sta controller to work.



I have two of these in a Threadripper PC. In an X16 socket 4 M.2 drives. In an X8 socket 2 M.2 drives. All six drives run off cpu lanes at max speed for the M.2 drive. FLAWLESS with Sabrent GEN4 drives for months. No temp throttling.






- The heat sink plate is WELL CONSTRUCTED and nice and thick! Make sure you mount your M.2 NVMe drives and then place the heat sink adhesive on the drives and then mount and screw the plate in place. - Note: the board has a +12V fan connector on it that is not used in this variant. Riitop sells another that is a fan-based model were a fan (in place of the plate) would normally mount. - The kit comes with a decent screwdriver you need to install the heat sink plate. I have sooo many screwdrivers now because I have ordered similar kits.
